Details of Pipe Seam AnchorA slit-tube metal anchor is a type of anchor manufactured by means of rolling and pressing sheet metal into a tubular rod with longitudinal slits. It can be drilled through a rock drill into a hole smaller than the diameter of the anchor to apply direct radial pressure and create resistance through the layers to prevent sliding of the surrounding rock. At the same time, the anchor tray pallet provides additional support.
Contacter maintenant
Product Details:Slit Tube Metal Anchor is an anchor product manufactured through the use of sheet metal rolled and pressed into a tubular rod with longitudinal slits. This type of anchor prevents the surrounding rock from sliding by drilling holes into the rock that are slightly smaller than the diameter of the anchor, realizing that radial pressure is exerted around the holes and generating friction.
Contacter maintenant
Product Details:Anchor disk is an important part of mine support, which is mainly divided into two types: square round hole anchor disk and round round hole anchor disk. They are fixed inside the surrounding rock by anchors to change the mechanical state of the surrounding rock and form a stable rock belt, which maintains the stability of the roadway through the joint action of anchors and surrounding rock.In mine support, anchor pan is an active defensive support method, representing a major change in the field of mine support.
Contacter maintenant
Anchor Tray DescriptionAn anchor tray is a fixing device used in coal mines that is made from a high-strength steel tube with longitudinal slits. It is installed in drill holes slightly smaller than the diameter of the pipe, which immediately exerts radial pressure on the hole wall and stops the surrounding rock from sliding down. At the same time, the pallets of the anchor tray provide additional load-bearing capacity. In this way, the surrounding rock is under three-way stress.
Contacter maintenant
Product introductionMining pallet a kind of pallet used for mine roadway, tunnel, especially coal mine roadway anchor support, the center of the pallet has a hole for the anchor to pass through, the central part of the hollow spherical projection, there can be a platform at the top of the spherical projection, the pallet can be made of steel plate or cast iron, the pallet made of cast iron can have reinforcing rib around the spherical projection. As an important part of the anchor support system, the performance of the anchor tray directly affects the support effect of the anchor.
Contacter maintenant
Product Description:M steel belt is a new type of mine support material, also called top plate steel belt, M steel belt is made of strip steel with thickness of 2-5MM width of 140-220MM, cold bending into M type, and then processed in the center of the steel belt with anchor hole.
Contacter maintenant
Product introductionMining pallet a kind of pallet used for mine roadway, tunnel, especially coal mine roadway anchor support, the center of the pallet has a hole for the anchor to pass through, the central part of the hollow spherical projection, there can be a platform at the top of the spherical projection, the pallet can be made of steel plate or cast iron, the pallet made of cast iron can have reinforcing rib around the spherical projection.Mining pallets can be made of steel plate or cast iron material.
Contacter maintenant
Product details:Anchor pan is a kind of equipment used for roadway support, which changes the mechanical state of the surrounding rock through the joint action of anchor rods and surrounding rock to maintain the stability of the roadway. The anchor plate makes the roadway form a whole and stable rock belt around the roadway, thus preventing the surrounding rock from loosening and deformation, and protecting the roadway from the influence of geological forces.
Contacter maintenant
Anchor Tray Description:As an important part of the anchor support system, the performance of the anchor tray directly affects the support effect of the anchor. The role of the tray is to transfer the thrust force generated by the nut locking torque to the top gang to generate the initial anchor force, and at the same time transfer the pressure of the roadway top gang to the anchor rod to generate the working resistance, which together reinforce the surrounding rock and stop the displacement of the roadway top gang.
Contacter maintenant
Anchor Tray Description:1. Strength and stiffness: The pallet needs to have sufficient strength and stiffness to withstand the thrust generated by the locking moment of the anchor and the pressure of the top gang. This ensures that the pallet can effectively transmit forces and avoid breakage or deformation.2. Material selection: the material of the pallet should have enough tensile strength and wear resistance to cope with the tensile force and friction force in the process of anchor support. Common pallet materials include steel, aluminum alloy, etc.
Contacter maintenant
Anchor Tray DescriptionMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall to exert radial pressure and stop the friction of the surrounding rock sliding down the hole wall, coupled with the support force of the anchor pallet pallet, so as to make the surrounding rock in a three-way force state.
Contacter maintenant
In the dynamic landscape of construction, Sheet Rock Threaded Rod Anchors remain steadfast, pioneering progress and innovation. They are the threads that weave together architectural aspirations, engineering brilliance, and the promise of a brighter future. With every turn of a threaded anchor rod, a story of strength, innovation, and excellence is written.
Contacter maintenant
Description of Anchor Tray for Coal MiningMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall radial pressure and friction to stop the perimeter rock from sliding down, coupled with the anchor pallet pallet bearing force, so as to make the perimeter rock in a three-way force state.
Contacter maintenant
Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.
Contacter maintenant
Tube Seam Anchor OverviewWorking Principle of Pipe Seam AnchorWhen a slotted anchor is installed in a hole smaller than the diameter of the pipe, three forces are exerted on the surrounding rock: radial pressure on the hole wall over the entire length of the slotted anchor, friction to stop the surrounding rock from sliding down the hole, and the support force of the slotted anchor pallet, which makes the surrounding rock more stable.Specification of Slit Anchor1、Outside diameter (mm):φ33,φ40,φ43 (0.5).2、Length-(mm):-1200、1500、1800、2000、2500,3, Material: Q235, 16Mn, 20 Mnsi.Technical requireme
Contacter maintenant
Product introductionMining pallet a kind of pallet used for mine roadway, tunnel, especially coal mine roadway anchor support, the center of the pallet has a hole for the anchor to pass through, the central part of the hollow spherical projection, there can be a platform at the top of the spherical projection, the pallet can be made of steel plate or cast iron, the pallet made of cast iron can have reinforcing rib around the spherical projection.Main specifications of anchor tray: 120*120*6 120*120*8 120*120*10 150*150*10 150*150*8 140*140*10 140*140*8Product classification:1.
Contacter maintenant
Fast Drying Resin Capsule A quick-drying resin capsule anchor bolt is a special product used to secure and anchor equipment in buildings. It usually consists of two parts: a plastic tube pre-filled with resin capsules and a metal bolt with threads. In the process of use, the pre-filled resin capsule is first placed into the hole, then the metal bolt is inserted and rotated to rupture and mix the resin capsule, ultimately forming a strong fixed structure.Advantages of quick-drying resin capsule anchor bolts include easy installation, good fixing effect and fast hardening speed.
Contacter maintenant
Product DetailsHollow anchor rod is a degree of metal plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a distinction of 2 ~ 3mm), can be immediately along the hollow to the 80 ~ 100cm range of radial strain on the hole wall and the friction produced via the layer to save you the encircling rock sliding down, coupled with the anchor tray tray bearing force.
Contacter maintenant
Mesh ClassificationWelded steel mesh can be divided into: cold rolled ribbed welded steel mesh, cold drawn round welded steel mesh, hot rolled ribbed welded steel mesh, of which cold rolled ribbed welded steel mesh is the most widely used.
Contacter maintenant
Product DetailsThis product has excellent properties such as long shelf life, high anchoring strength and convenient construction. It can be used with metal or FRP anchors, and is widely used in underground engineering, slope support, equipment installation of vertical wells, connection of building components, anchoring of equipment foundations, etc.
Contacter maintenant
Resin anchor product introductionResin anchoring agent is the use of high-strength anchoring agent special unsaturated polyester resin and marble powder, accelerator and auxiliary materials, according to a certain proportion of the mastic-like bonding material, with special polyester film will be divided into two-component packaging with the curing agent medicine volume. This product has a long shelf life, high anchoring strength, convenient construction and other excellent performance.
Contacter maintenant
Split Bolt Set Description:1. Split Bolt (Bolt): mainly responsible for connecting structural components, usually made of high-strength metal materials with certain tensile and torsional strength.2. Nut (Nut): used to fix the position of the bolt, usually made of metal materials, need to be used in conjunction with the bolt when connecting.3. Washer: Used to increase the connection area, dispersing the connection pressure, preventing damage to the structural parts, usually made of metal or plastic materials.4.
Contacter maintenant
335 Resin Anchor DescriptionMSGLW series of longitudinal ribless threaded steel resin anchor metal rod products are widely used in underground rock, semi-coal rock and coal tunnel anchor support, especially suitable for underground tunnel and refuge support under complex conditions.
Contacter maintenant
Product DetailsNowadays there are two main types of anchor disk widely used, square round hole anchor disk and round round round hole anchor disk. Anchor disk is to change the mechanical state of the surrounding rock itself through the anchors inside the surrounding rock, to form a whole and stable rock belt around the roadway, using the anchors and the surrounding rock together to achieve the purpose of maintaining the stability of the roadway.
Contacter maintenant
